• Vehicle Restraints
    • Dock Levelers
    • Truck Levelers
    • Upgrades & Conversion Kits
    • Dock Seals & Shelters
    • Curtain Systems
    • Dock Accessories
    • Doors - Exterior
    • Doors - Interior
    • Doors - Cold Storage
    • Pre-Fabricated Buildings
    • In-Plant Offices
    • Mezzanines
    • Vertical Lifts
    • Ergonomic Lifts
    • Barrier Systems
    • Design
    • Environmental
    • Ergonomic
    • Safety
    • Productivity
    • Dock Accessories
    • Turnkey Installations
    • Upgrades & Conversion Kits
    • Feedback
    • Information Request
    • Locations

    		•




    Dock Accessories
    Why do we include Dock Accessories in the Solutions section? Like our Upgrades & Conversion Kits, sometimes a ”quick fix,” simply adding one new product or enhancing existing equipment, is all you need to enhance your company’s safety, productivity and profitability. These are Solutions to many smaller issues, and shouldn’t be ignored as options ultimately designed to boost your bottom line!


    HV/LS Industrial Ceiling Fan
    Rite-Hite AirLine Fabric Air Tunnel
    Forklift/Pedestrian Safety Communication System
    Portable Plates
    Dock Communication Solutions
    Edge-of-Dock Leveler
    Trailer Stand
    Wheel Chocks/Raisers
    Reflecto Guides
    Seals
    Bumpers
    Hoods
    Lights
    Fans


    Portable Plates
    Truck Dockboard
    Available in either aluminum or steel, truck dockboards compensate for the difference in height between dock and truck. Angle stops lock board firmly in place while safety tread decking prevents slippage.    		Rail Dockboard
    Rail Dockboards, designed to connect your dock with railcar, have a rugged under-brace to fit your loading requirements for safe and positive positioning. Several design applications include rectangular, flared, refrigerator car, car to car and plug door cars.

    Dock Plates, constructed of tough, weather-resistant aluminum or heavy-duty steel, feature locking legs to hold it safely in position. Its angled crown compensates for height differences between dock and truck.


    Edge-of-Dock Leveler
    Edge-of-Dock Leveler
    The RHE Edge-Of-Dock Leveler is a lighter duty, less expensive way to bridge the "gap" between the trailer and your dock for captive fleets or constant bed-height trailers.


    Dock Communication Solutions
    Light Communication System
    A Light Communication System establishes a clear line of communication between drivers and dock personnel during the loading/unloading process.    		Dok-Commander Combination Control Panel
    The Dok-Commander Combination Control Panel integrates the controls of multiple devices. Can combine dock leveler, vehicle restraint, dock light, and overhead door operation into one control box.


    Trailer Stand
    TS-2000 Trailer Stand
    Only ONE trailer stand is required to prevent spotted trailer tip over and landing gear collapse when you use Rite-Hite’s TS-2000 Trailer Stand. Safe, productive and easy-to-use, its maintenance-free design and 100,000 pound capacity was built to handle and fit most trailers.


    Wheel Chocks/Raisers

    Wheel Chocks
    Wheel chocks help prevent trailer movement. Made of cast aluminum, rubber or urethane, wheel chocks snug under tire contour for maximum holding to minimize accidental movement from fork truck jolts and vehicle brake failure.    		Wheel Raisers
    Wheel raisers safely and conveniently elevate trucks to dock height.


    Reflecto Guides
    Reflecto Guide
    Reflecto-Guide™ truck guide stripes are a superior illuminating system that define the docking area and make backing and spotting trailers easier. Reflecto-Guides are also commonly used to mark other potential problem areas like gates, hazardous corners, posts or columns.


    Seals
    Use Gap-Sealr™ or Wedg-It™ weather seals to fend off the elements, rodents and insects by closing the gap between your sectional door, dock and leveler.

    Lanyard Cup Seals seal the hole created in lanyard cups and Rear Hinge Seals close the gap at the rear of dock leveler.

    Rite-Seal from Rite-Hite is perfect for inexpensive, all-weather protection with difficult-to-seal overhead doors.

    Frommelt HeatShield™ Protector Panels act as a barrier to prevent scorching and burning of unprotected dock seal or shelter side pads caused by the intense heat generated by swing-out dock lights.


    Bumpers
    FRONT VIEW
    SIDE VIEW
    Dok-Saver™
    Prevent potential structural damage to your building from missing or damaged bumpers! Rite-Hite's revolutionary, patented Dok-Saver™ bumper withstands impact and abuse from trailer after trailer, year after year. Comes with a 10-year warranty.
    Laminated Bumper
    Laminated dock bumpers are ideal for flat plate or angle applications. Steel-faced bumpers are for use in dock areas where excessive friction occurs. Extra-thick dock bumpers are available when dock seals are extra thick or where greater thickness is needed for decline approach or overhangs


    Hoods
    Above Shelter or Service Door Hoods help minimize damage and hazardous situations at your dock, service doors or stairways caused by ice and snow build-ups or heavy rain.


    Lights
    Cool Head™ Lamp
    Rite-Hite’s Cool Head™ lamps withstand abuse to keep docks lighted and productive. Its cool-to-the-touch, high-impact polycarbonate head rebounds from crushing blows and its flexible arm withstands impacts that would disable conventional lights.

    Rite-Lite HD-LED Dock Light
    Brighter Light, Lower Energy Costs. Rite-Hite combined state-of-the-art technology with a heavy-duty design to completely illuminate the entire length of the trailer, using a whopping 90% less energy than a standard 150 watt bulb. The type of bulb Congress recently banned, by the way! The Rite-Lite HD-LED Dock Light has a minimum life of 50,000 hours, eliminating the need to replace over and over. Combine that with your energy savings, and you could save up to $80, per light, per year!

    LED Versa LightŪ
    The greenest in dock and truck lighting technology is the LED Versa LightŪ. This new dock light illuminates the entire length of the trailer:
    · Using a flexible multi-position tube that resists overhead door impact;
    · With LED lighting that uses 2/3 less energy than a 150 watt bulb and adheres to the new government standard;
    · With LED lighting that has a 70,000 + hour life span.


    Fans

    Coolman Dock Fan
    The Coolman 2500 Dock Fan has unique bracketing to allow service to two loading dock openings, swivels and pivots to allow for directional air flow and moves out of the way for full access fork-truck traffic.



    Vehicle RestraintsLoading Dock LevelersTruck LevelersLoading Dock Seals & SheltersLoading Dock Accessories
    Loading Dock UpgradesLoading Dock Conversion KitsPre-Fabricated BuildingsIn-Plant OfficesMezzanines
    Vertical LiftsErgonomic LiftsBarrier SystemsAbout W.E. CarlsonNorthern Illinois Loading Dock & Door Distributor
    NW Indiana Loading Dock & Door DistributorMaterial Handling SolutionsLoading Dock Safety SystemsWhole Body VibrationSmooth Transition Dok System
    Environmental SolutionsFacility Productivity SolutionsLoading Dock DesignLoading Dock MaintenanceLoading Dock Repair
    Industrial Door MaintenanceIndustrial Door Repair Loading Dock EquipmentHV/LS Industrial Ceiling Fan